|
Product Details:
|
| Material: | Copper Or Cooper Alloy Wire | Wire Diameter Range: | φ0.05～φ3 Mm |
|---|---|---|---|
| Coating Type: | Tin Or Tin-lead Alloy | Content Of Tin: | 10-100% |
| Coating Thickness: | ＞1μm | Number Of Turns、: | ＜100 |
| Wire Lines: | Single | Speed: | 0～600m/min |
| High Light: | 600m/min electroplating machine,tin lead alloy electroplating machine,Reciprocate electroplating machine |
||
Reciprocate electroplating tin or tin-lead alloy production line Tin or tin-lead alloy electroplating machine
1. Main parameters of tin or tin-lead alloy electroplating machine.
| No | Item | Specification |
| 1 | material | copper or cooper alloy wire |
| 2 | wire diameter range | φ0.05～φ3 mm |
| 3 | coating type | tin or tin-lead alloy |
| 4 | content of tin | 10-100% |
| 5 | coating thickness | ＞1μm |
| 6 | number of turns | ＜100 |
| 7 | wire lines | single |
| 8 | speed | 0～600m/min |
2. Technological process of production.
pay off→cathode discharge oil→anode discharge oil→water rinsing→pickling→water rinsing→tin or tin-lead alloy plating→water rinsing→neutralization→water rinsing→drying→take up
3. Main process introduction.
Cathode discharge oil: remove the oil on the surface of copper wire to ensure the binding force of the coating .
Anode discharge oil: same as the cathode discharge oil.
Pickling: remove the oxide from the surface of the copper wire.
Water rinsing: clean the wire thoroughly after the tank to avoid mutual contamination of the tank.
Tin or tin-lead alloy plating: the copper wire is coated with a uniform coating.
Neutralization:neutralize the acid on the surface of copper wire to prevent discoloration on the surface of the product.
4.Packaging＆Shipping
We can pack it by pallet, or according to the customers' specific requirements.
Port: Shanghai/Ningbo
4. Our Services
In order to guarantee the customers are able fully to operate the machine, if the customer need, we can help customer training, includes:
(1) Correct operating mode
(2) Correct maintenance way
(3) Correct technological process control
(4) Remove simple problem
All the electroplating machine of our company have already been widely used in electroplating area.
Any doubt please contact us.
Contact Person: Mrs. YeGuiFeng
Tel: +86 85778256
Fax: 86-571-85778267
