|
Product Details:
|
| Product Name: | PVDF PP Tube Welders Hydraulic Automatic HDPE 220V Plastic Butt Fusion Welding Machine For 63mm To 160mm | Model Number: | SHT160-2 |
|---|---|---|---|
| Working Range: | 63mm, 75mm, 90mm, 110mm, 125mm, 140mm, 160mm | Heating Plate Max.temperature: | 270 Degree |
| Heating Plate Power: | 1.6kw | Planing Tool Power: | 0.8Kw |
| Power: | 2.4KW | Function: | Cutting And Welding Plastic Pvc, Pe, Pp Tube |
| Applicable Industries: | Construction Works , Energy & Mining, Other | Warranty: | 1 Year |
| Usage: | PVDF And PP Plastic Pipe Butt Welding | Weight: | 42kgs |
| Application: | Construction Project | Key Selling Points: | Easy To Operate |
| High Light: | 220V Plastic Butt Fusion Welding Machine,Automatic Plastic Butt Fusion Welding Machine,160mm Plastic Butt Fusion Welding Machine |
||
PVDF PP Tube Welders Hydraulic Automatic HDPE 220V Plastic Butt Fusion Welding Machine For 63mm to 160mm
Plastic pipe welding machine Application
The machine should be operated on a dry area. The protective measures should be adopted when it's used in rain or on wet ground. The machine is operated by 220v±10%, 50Hz, if extended wire should be used, it should have enough lead section according to its length. Milling cutter with limit switch can prevent the accidental activation.The raw material of the machine frame is aluminum alloy, 45°slant design, is better to operate.
Plastic pipe welding machine Technical Data
Plastic pipe welding machine Selling feature
Suitable for butt welding of plastic pipes and fittings made of PE, PP, and PVDF in a ditch in worksite or workshop.
Consists of basic frame, hydraulic unit, planning tool, heating plate, support for planning tool & heating plate, and optional parts.
Removable PTFE coated heating plate with separate temperature control system
Electric planning tool
Be made of light weight and high strength material; simple structure, small and delicate, user friendly.
Low starting pressure ensures reliable welding quality of small pipes.
Changeable welding position enables to weld various fittings more easily.
High accurate and shockproof pressure meter indicates clearer readings.
Other size in option
We have size of 160mm, 200mm, 250mm, 315mm, 355mm,450mm,630mm,800mm, 1200mm,1600mm.
1. Check whether the specification and pressure grade of the pipe to be welded are correct, and check whether there are bumps, bumps and scratches on the surface. If the depth of the scar exceeds 10% of the wall thickness of the pipe, it should be partially removed before use;
2. Clean the oil or foreign matters at both ends of the pipe with a clean cloth;
3. Place the pipe to be welded in the frame slip, so that the length of both ends is equal (as short as possible without affecting the milling and heating). The part outside the frame of the pipe shall be supported by supports to reduce friction, and then be fastened with slips;
4. Put in the milling cutter, first turn on the power switch of the milling cutter, then close both ends of the pipe and apply appropriate pressure until there are continuous chips at both ends, remove the pressure, wait for a moment, then withdraw the movable frame, turn off the power supply of the milling cutter and take out the milling cutter. The chip thickness should be about 0.2-0.5mm. The chip thickness can be adjusted by adjusting the height of the milling insert;
5. Close the two pipe ends and check the alignment of both ends. The misalignment at both ends of the pipe should not exceed 10% of the wall thickness, which can be improved by adjusting the straightness and the elastic slip of the pipe; the gap between the two ends of the pipe should not exceed 10% of the wall thickness, otherwise it should be milled again until the above requirements are met;
6. Clean the dust and residue on the surface of the heating plate (pay special attention not to scratch the nonstick layer on the surface of the heating plate);
7. After the temperature of the heating plate reaches the set value, put it into the rack and apply the specified pressure until the minimum crimping on both sides reaches the specified value;
8. Reduce the pressure to the contact pressure and continue heating for the specified time;
9. When the time is up, withdraw the movable frame, quickly take out the heating plate, and then close the two pipe ends, with the time interval as short as possible;
10. Raise the pressure to the specified welding pressure, lock the fixing bolts on both sides of the frame, and keep the pressure for natural cooling. After cooling for the specified time, the fixing bolt is fully opened. Loosen the slip and take out the connected pipe.
1. Using Teflon coating material imported from Japan, after twice coating and three processes.
2. The solid core of the Heating plate is thickened and non-stick tube, the heat transfer is even, supporting the aviation connection line to ensure the contact safety of the power supply.
3. Compared with other manufacturers, the thickness of Heating plate is increased by 5mm, and the heat storage and thermal conductivity are strong.
1. High power milling cutter, mirror cutter disk, strong motor, high concentricity, smooth milling.
2. High-power Bosch drill is adopted for milling motor, which is strong and strong without slipping
3. The milling cutter is equipped with a limited position switch, which can be rotated only when placed in the frame to prevent accidental injury.
Contact Person: Mrs. YeGuiFeng
Tel: +86 85778256
Fax: 86-571-85778267
