|Product Name:||Portable Hot Sale 2'' To 8'' Pipe Drain Cleaning Machine 50M Working Length 750w For Sale||Motor:||110v 60hz, 220v 50hz(60hz)|
|Frenquency:||50Hz Or 60Hz||Power:||750w|
|Size( Capacity):||2''-8''(50-200mm)||Packing:||1ply Wood/set|
CE Approved Pipe Drain Cleaning Machine,
Drain Pipe Cleaning Machine 750w,
50M Length Drain Pipe Cleaning Machine
|Max working length:||50 M|
|Accessories:||4 pieces Φ30mm*4.6M cables|
Insert the flexible shaft into the tail of the main machine first, reasonably select cutter head and fit in flexible shaft according to different obstructions, put the flexible shaft into the pipeline, start switch of power source when reach obstructions, press clutch handle to make flexible shaft rapidly rotate to mash the obstructions. If the pipeline is still dredged, let the clutch free and push the flexible shaft deeper in pipeline continually, operate repeatedly up to dredging of pipe. When dredge the pipeline with water, please use the suitable shaft, connect the roller at the tail of the machine and pull out the shaft according to the length to be used.
Make sure machine is unplugged from power source before performing maintenance or making any adjustment.
Lubricate machine with grease at grease fitting (located on jaw housing) once a week if used every day; once a month if used less. Place a drop of oil on each of the bearing points, thrust bearing, clutch jaws, etc., at least once a year.
Cables should be thoroughly flushed with water to prevent damaging effects of sediment and drain cleaning compounds.
Periodically lubricate cables and couplings.
When not in use, store cables indoors to prevent deterioration by the elements.
Cables should be replaced when they become severely corroded or worn. A worn cable can be identified when outside of coils become flat.
Motor-driven equipment must be kept indoors or well covered in rainy weather. Store the machine in a locked area that is out of reach of children and people unfamiliar with drain cleaners. This machine can cause serious injury in the hands of untrained users.
If machine has been exposed to freezing weather, unit must be run for ten (10) to twenty (20) minutes without load to warm up. Failing to do this will result in frozen bearings. If machine is exposed to weather for a period of time, moisture will form across motor windings causing motor to burn out.
Optional plug for you
1) We offer 1 year warranty and free spare parts. (Except for wearing parts)
2) We offer voltage and frequency of motor customization service, such as 110v 60hz.
3) We can put your LOGO on machine plate or packing(need your authorization on brand)
4) Machine can be shipped oversea or to domestic place by sea or by air in both LCL & FCL.
Contact Person: Mrs. YeGuiFeng
Tel: +86 85778256