|Name:||GT3-6 Wire Straightening And Cutting Machine Production Line||Control:||Automatic|
|Warranty:||1 Year||After-sales Service Provided:||Engineers Available To Service Machinery Overseas, Online Support|
|Model:||SUNTECH-GT3-6||Voltage:||415V 50Hz (or Customizable)|
|Working Speed:||90-110 Times/min||Driven Power For Straightening And Feeding:||7.5KW|
|Driven Power For Cutting:||3KW Servo Motor||Straightening And Cutting Length:||0.8-3.0m, Tolerance±1mm|
|Wire Diameter:||Φ2.50-6.00mm||Material Of Treated Wire:||Carbon Content≤0.2%, Tension Strength≤550MPa, Low Carbon Steel Wire|
Straightening Wire Mesh Welding Machine,
7.5KW Wire Mesh Welding Machine,
415V 50Hz Wire Mesh Welding Machine
1. Description of GT3-6 Wire Straightening and Cutting Machine Wire Mesh Welding Machine automatic cattle fence mesh machine in high speed.
GT3-6 straight cutting machine is a high quality equipment which is absorb advanced technology in domestic and foreign. Its general layout is as following:
1. Chief body of straightening and cutting machine:
1)Chief body of straightening and cutting machine is composed of wire clamping device, straightening device, cutting device and transmission structure.
2)Machine frame is welded by profiled bars and steel plates.
3)High speed rotate type straightening roller is used for wire straightening, it's driven by motor.
4)There have 10pcs straightening moulds inside straightening roller. According to wire diameter range, there have three sets for replace.
5)Totally have 2sets wire clamping device, which are separately installed at front and back of straightening roller, steel wire is pressed by pneumatic. Air pressure will reduce during wire cutting process to reduce the abrasion of clamping wheel onto wire surface. The straightening and clamping are driven by 7.5KW motor.
6)3KW Servo motor is used to offer rotating power for cutting device.
2. Wire falling track:
Wire falling track is composed of straight wire track, length position device, transmission structure for wire falling and wire loading frame.
1)The straight wire track have three troughs. Use different trough according to different wire diameter to ensure the accuracy of length straightening.
2)Length position device is fixed at end of track for the length inspection under the impulsion of steel wire, which have simple structure but accuracy position.
3)Transmission structure for wire falling is driven by cam motion on wire cutting shaft, have wire falling while wire cutting.
4)Wire loading frame is composed of many independent bended plates.
5)The falling wire track is designed with 3meters mould, can have split joint according to requirements.
1)This pay-off is composed of bottom seat, supporting shaft, wire loading disc and brake device.
2)Bottom seat is welded by profiled bars, which need big space and enhanced the stable of pay-off device.
3)Wire loading disc is welded by steel plates, whose loading capacity is 1.0Ton.
4)Support shaft is fixed on bottom seat, use thrust bearing as support, reduce the revolving resistance for pay-off.
5)Pneumatic driven type brake is fixed at bottom of support shaft, which can control the rotating speed of pay-off according to actual situation. It can stop the pay-off when chief machine stop running.
2. Technical parameter
|2||Straightening and cutting length||0.8-3.0m, tolerance±1mm|
|4||Driven power for straightening and feeding||7.5KW motor|
|5||Driven power for cutting||3KW Servo motor|
|6||Way of control||DELTA PLC and inverter|
|7||Material of treated wire||Carbon content≤0.2%, tension strength≤550MPa, low carbon steel wire|
|8||Weight of whole line||About 1.7 Ton|
Details please see above.
4. Packaging & Shipping
We can pack it by pallet, or according to the customers' specific requirements.
5. Our Services
Any doubt Please contact us.
Contact Person: YeGuiFeng
Tel: +86 85778256