|
Product Details:
|
| Type Of GI: | Electro Galvanizing | Diameter Of Treated Wire: | ф1.0-ф4.0mm |
|---|---|---|---|
| Thickness Of Zinc Coating: | 40-150g/m2, | DV: | 45mm*m/min |
| Production Capacity: | 8. 720kg/Hour 12-14Ton Per Day (20 Working Hours) (calculated Based On 2.0mm Wire ) | Wire No.: | 24 (could Be Added Into 48) |
| High Light: | Gabion Mesh Electro Galvanizing Machine,Multi Wire Electro Galvanizing Machine,720kg/Hour zinc coating machine |
||
Multi wires heavy electro galvanizing line for gabion mesh / barbed wire
| Wire diameter: |
Φ1.0mm-Φ5.2mm (annealing wire) |
| Application | for gabion mesh/barbed wire |
| Wire material |
SEA1006, SEA1008, annealing steel wire |
| Galvanizing thickness: |
40-150g/m2, |
| DV value | 45mm*m/min |
| Wire No. |
24 wires or more |
| Capacity | 720kg/Hour 12-14Ton per day (20 working hours) |
| Reference wire diameter | Φ2.0mm |
Wire pay-off → Electrolytic acid pickling → Double Water washing → Galvanizing → Double Water washing →Passivation → Double water washing → Drying → Wire take-up.
1. Electrical control cabinet.
The cabinet is equipped with ventilation and cooling devices. It is installed in the control room near the equipment to save cable costs. The control room must be rust-proof, acid-proof and air-conditioned. The cabinet is designed by the seller with two doors on both sides and sealed. The electrical components and cables are neatly arranged.
2. Relays and contactors use the Schneider brand. The insulation and protection of all electrical control devices can ensure that the circuit control system operates stably and safely when the temperature is <45 ° C and the relative humidity is 80%.
3. Pumps and motors:
Uses well-know Chinese pumps. The motor can be operated in acid, alkaline and medium media environments.
4. Operation panel:
According to the production line operation requirements, the main operation board and auxiliary operation board are used. A set of touch screens are used for the main operation panel, which displays the current, line speed, equipment temperature, and equipment status of the main motor, and is set near the kettle. The host operation panel uses a set of touch screens to display the main motor current, line speed, equipment temperature, equipment status, etc., and is set near the sink. The auxiliary operation panel is equipped with the necessary control and indication devices.
5. Power supply: 250-300 KW
Three-phase power: 380 + 10% V three-phase 50HZ
Single-phase power: 220V, 50HZ
Limit switch, proximity switch, PLC, operation interface: 24VDC
Contactor power: 220VAC50Hz
Solenoid valve power: 24VDC
6. Electronic components:
All electronic components and automation instruments are acid and alkali resistant. All control cables, signal cables and power cables are special high temperature resistant cables in a hot environment.
Contact Person: YeGuiFeng
Tel: +86 85778256
Fax: 86-571-85778267
