|
Product Details:
|
| RAW MATERIAL: | 30MNSI,30Si2Mn | FINISHED PRODUCT: | PC BAR |
|---|---|---|---|
| APPLICATION: | REINFORCEMENT WELDING CAGE IN CONSTRUCTION | COLOUR: | CUSTOMIZED |
| High Light: | 10.7mm Steel Bar Production Line,12.6mm Steel Bar Production Line,70m/min steel rebar production line |
||
30MnSi PC Bar Steel Production Line with IGBT Induction Heating Furnace
I. Whole Work Flow:
Pay off → Wire arranging→ Mechanical descaling→ Horizontal type wire drawing and forming machine → Vertical and horizontal straightening → Three roll clamping and driving→ Cleaning unit →Heating No.1 →Heating No.2 →Heating No.3 → Heat Preservation → Cooling for Quenching → Induction Tempering → Heat Preservation →Cooling for Tempering →Three roll clamping and driving → Shearing → Wire separating → Wire take-up
| No. | Item | Specification |
| 1 | Raw material | 30MnSi,30Si2Mn and other alloy spring steels |
| 2 | Diameter | Φ 7.0-13.0mm |
| 3 | Working speed |
90-100m/min for type φ 7.1mm; 80-90m / min for type φ9.0mm; 65-70m/min for type φ 10.7mm; 40-45m/min for type φ 12.6mm. |
| 4 | Induction quenching temp. | ≤950ºC constant and adjustable |
| 5 | Induction tempering temp. | ≤450ºC constant and adjustable |
| 6 | Temp. control accuracy | ≤ ±5ºC |
| 7 | Take-up coil dimension | φ1800-φ2400mm |
| 8 | Pay-off | Horizontal rotating type pay off |
| 9 | Center elevation | 1000mm |
| 10 | Production method | Continuous production |
| 11 | Finished products |
1) Products keep consistence with "GBT5223.3-2005" and "JISG3137-1994" |
III. IGBT Induction heating power supply feature:
1. Voltage/Current double closed circuit control, this mode has constant voltage operation feature, it means the voltage of inductors will not be influenced by Inlet voltage/Load resistor, etc. Constant voltage make the load heating most stable
2. Adopt the most advanced control technology in the world. By a intelligent programming device CPLD, make IGBT induction heating power supply has the function of Fixed-angle&Phase locking/Frequency automatic tracking, etc. This design can improve the stability and efficiency. Because the machine has protect function of Over-frequency or Low-frequency unlock, it can accurately protect wire heating inductors from short circuit and open circuit fault
IV. Running speed:
For makingφ7.1mm,Rated speed: 100m/min; Max. speed: 110 m/min(2.07t/h);
For makingφ9.0mm,Rated speed: 90m/min; Max. speed: 100m/min(3.01 t/h);
For makingφ10.7mm,Rated speed: 65m/min; Max. speed: 80m/min(3.18t/h);
For makingφ12.6mm,Rated speed: ≥40m/min;Max. speed: 50m/min(2.94t/h);
Contact Person: YeGuiFeng
Tel: +86 85778256
Fax: 86-571-85778267
